|
The Digital Angle Transfer Set or "DATS" is a high accuracy X, Y table coupled with a Heidenhain angle readout. This setting device is used as the final stage prior to wafering on a wire saw. It allows the operator to mount multiple cores, bars, ingots and boules with individual angle compensation. This system can be used with a wide variety of materials such as sapphire, quartz, silicon, etc. |
|
SPECIFICATIONS
" Single Operator "
Heidenhain ND 281B Angle Display Unit and Encoder
X-Y Table Motion: X Travel (300MM/12"), Y Travel (225M/9")
(4) Daedal Ball Slide Sets With 0.00008 Inch Accuracy Per Inch
Production Accuracy +/- 30 Arc Seconds
Input Power - Single Phase: 120/240V - 50-60 Hz
Dimensions: 500mm/20" (H) x 610mm/24" (L) x 457mm/18" (D)
Weight: 44.5 KG/98 LBS>
Operating Room Temperature Range: 20 C / 68 F (Min.) - 26 C / 78 F (Max.)
One Year Limited Warranty
* Specifications Subject To Change Without Notification. *
CONTACT INFORMATION
| Alvord Systems,
Inc. 620 St. Clair Avenue Clairton,PA 15025 USA Phone 412/233-3910 Fax 412/233-4991 |
Agent: Garam
Electronics Corp. 723 Shingil-7 Dong Yeondeungpo-Ku Seoul, Korea Phone 82-2-782-8771 Fax 82-2-785-2577 / 2578 |